Dress Style Orthotics
TL 2100 Dress Style Orthotics
Thin, lightweight and semi rigid. Best for low heel dress shoes. We make these with a very shallow 4 mm heel cup. The standard top cover is 3 mm thickness sulcus length EVA extension and black vinyl.
When ordering, please send the shoes in which the orthotics will be worn.
Carboplast Dress Style Orthotics
Using Carboplast, these dress orthotics are more flexible than TL 2110 and an aperture can be cut in the heel cup to lower the profile and reduce heel slippage. The standard top cover is 3 mm thickness sulcus length EVA extension and black vinyl. Carboplast is not heat adjustable.
When ordering, please send the shoes in which the orthotics will be worn.
Polypropylene Dress Style Orthotics
This low profile device is very flexible. It fits well in low heel dress shoes up to 1” heel height. The standard top cover is 3 mm thickness sulcus length EVA extension and black vinyl. The polypropylene is ground thin at the heel contact point in order to prevent heel slippage and reduce bulk. Optional: heel cup aperture.
When ordering, please send the shoes in which the orthotics will be worn.
Cobra Device
The picture above is an unfinished cobra device in position on a mold. The center of the heel and the lateral aspect of the shell are cut out to reduce bulk and allow it to fit in high heel shoes. The standard top cover is EVA sulcus length.
When ordering, please send the shoes in which the orthotics will be worn.